Dead Space (Remake)
Dead Space (Remake)

Repair the Comms Array

Repair the Comms Array in Dead Space Remake. Find the Ruby Semiconductor, replace wall panels, and activate the antenna. Collect a Power Node and an Audio Log.

·Multi-source verified (107/112)

To repair the Comms Array, head to the Communications Array area. Inside the Comms Array Locker Room, locate a locker containing a Ruby Semiconductor. Your primary task is to replace all the broken panels along the Eastern wall with intact ones. Once these repairs are complete, power will be restored to the primary antenna, allowing you to proceed with activating the Comms Array.

Repairing the Comms Array

  1. Go to the Communications Array.
  2. In the Comms Array Locker Room, find a locker with a Ruby Semiconductor.
  3. Replace all broken panels on the Eastern wall with intact panels.
  4. Return to the Comms Control Room.
  5. Activate the Comms Array to send out a distress call.

Collectibles in the Area

  • Ruby Semiconductor: Found inside a Locker in the Comms Array Locker Room.
  • Power Node #1: In the Tram Repair Room, enter and walk to the Southeast corner to find a Node Crate on the wall.
  • Audio Log: After grabbing Power Node #1, turn around to find an Audio Log on a nearby desk.

After activating the Comms Array, the USM Valor will respond. Following the Valor's explosion, you will take refuge using the large antenna as it retracts into the Ishimura. The chapter concludes after debriefing with Daniels back in the Communications Array.