Skip to content
- Brain Surgery
Car Mechanic Simulator 2021

- Brain Surgery

Learn how to perform brain surgery in Car Mechanic Simulator 2021, including the A++ method to minimize blood loss.

By ···10 min read·Multi-source verified
1 reading this guide  

Learn how to perform brain surgery in Car Mechanic Simulator 2021, including the A++ method to minimize blood loss.

Walkthrough
  1. 1
    Use the hand circular saw to cut around the skull to break it up. The cap should fall off and the patient's head should now be limp.
  2. 2
    Alternatively, use the black, hand laser (all the way to the right) to break up the skull with no bleeding, being careful to avoid hitting the brain or face.
  3. 3
    Remove the skull cap with your hands.
  4. 4
    Pull out the brain with your hands to expose the one big nerve.
  5. 5
    Stab the nerve with a knife until the brain becomes detached.
  6. 6
    Remove the brain by grabbing it and violently moving your hand left and right.
  7. 7
    Open the brain jar, pick up the new brain, and place it in the hole without letting go.

A++ Method:

  • Use the laser tool. Grab the laser with your hand slightly rotated from the default position.
  • While the laser is warming up, knock open the brain jar's lid.
  • Use the laser accurately to allow the patient to suffer zero (or close to none) blood loss from the skull cap removal.
  • Laser half of the cap off with one angle, then flip your hand around and do the other side of the skull.
  • If you need to flip your hand, do so behind the patient's skull to prevent any misfiring.
  • The laser box has a big, red emergency shut off button. Hit this as you go grab the green needle.
  • At most, you should suffer a blood rate loss of 9ml per second.
  • After removing the skull cap, use the green needle to stop blood loss by stabbing the patient in the face with it.
  • Pull out the brain and give a few quick jabs with the kidney knife (the big saw thing in the center table).
  • Quickly install the new brain. Do this fast.
Tips
  • Avoid hitting the brain or face when using the laser.
  • Flip your hand behind the patient's skull when rotating the laser angle to prevent misfiring.
  • Act quickly when performing the steps after removing the skull cap.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content