Awakening 2

Follow this comprehensive SOMA walkthrough for Awakening 2, guiding you through the Break Room, Machine Hangar, Robot Dock, and Observation Tunnel to find key items and progress.

Walkthrough:

1. From the intersection, note the blocked paths. The path to the right is blocked by a chainlink fence. Signs point to the Thermal Plant (blocked), Tech Depot (exit), and Break Room. The path to the left leads to the Observation Tower, Observation Tunnel, and Security.
2. Head to the Break Room. Interact with the DATA BUFFER to overhear a conversation about pneumatic seals and power for Theta.
3. Explore the Break Room and the adjacent bathroom.
4. Return to the intersection and remove the pneumatic seal on the door to the Machine Hangar.
5. Observe the two robots near the door; one is normal, the other is unsettlingly modified.
6. Enter the other half of the hangar and touch the modified robot. You'll hear the woman from earlier talking to it, mentioning structure gel. A loud crash occurs.
7. Return to the hangar door; the modified robot has broken out.
8. Exit the Machine Hangar and proceed right to the Robot Dock.
9. Go through the broken door and down the steps. Follow the path to a corner. The lights will go out. Press [CTRL] to crouch.
10. Sneak to the door with the pneumatic seal. Something attempts to break through but fails. Wait for the disturbance to pass.
11. Remove the seal and enter the room.
12. On the right desk, pick up the Omnitool (v 2.5 AI Helper Jane). Read the accompanying pamphlet. Near the back wall is a decapitated corpse, likely Louise Meuron.
13. Exit the room and return to the Tech Depot.
14. Go to the Service Console by the door. Place the Omnitool in the cradle on the left. Note the current date (2103/05/08) and remaining power (13 days). Observe character strings like Sub_Simon Jarrett and Aut_DavidMunshi2015v1. The Inventory shows two Basic Ductile Suits (BDS) in use, BDS #3 is contaminated, and others are fine.
15. Select the Omnitool option. Listen to the Orientation for Field Service Technicians by John Strohmeier for information on the management hierarchy and a map of Pathos-II sites (Upsilon, Lambda, Theta, Omicron, Delta, Tau, Phi). The orientation also covers using the Omnitool to open doors.
16. Select the Omnitool option again and choose 'Unlock Tool Box'. Take a tool chip from the box and click on the Omnitool.
17. Return to the Service Console, click Omnitool, and select 'Update Tool Chip'. Click 'Update' to refresh security ciphers.
18. Use the terminal by the chair (Pilot Seat #3 Upsilon). Select 'Reports'. Read the Pilot Report referencing Carl Semken and Amy Azzaro. Read the report from Chief Factor Jane Adam about pilot system instability.
19. Exit the Tech Depot and return to the Robot Dock. Go around the chainlink fence and up the steps into a hallway. Note sounds from the air ducts.
20. Proceed down the hallway to the top of steps on the left. Observe broken chainlink fence. Going straight leads to a closed door at the Thermal Plant and back to the Tech Depot.
21. Go down the steps. Swipe the Omnitool to open the circular door and enter the Observation Tunnel.
22. Check the DATA BUFFER to hear Azzaro and Semken discussing leaving Upsilon. Examine drawings on the table, including sketches of sea life with bio-mechanical growths. Note the message