Skip to content
Hardware
Dying Light

Hardware

Complete the Hardware quest in Dying Light by finding the Sonar on the other side of Infamy Bridge. Requires Duct Tape and Power Cables.

By ···10 min read·Multi-source verified
1 reading this guide  

Complete the Hardware quest in Dying Light by finding the Sonar on the other side of Infamy Bridge. Requires Duct Tape and Power Cables.

Walkthrough
  1. 1
    Gather 10 pieces of DUCT TAPE and POWER CABLES.
  2. 2
    Travel to the other side of INFAMY BRIDGE to find the SONAR.
  3. 3
    To cross INFAMY BRIDGE, you may need to use the GRAPPLING HOOK (which sometimes fails).
  4. 4
    Alternatively, climb up the bridge to where you collected the second set of bulbs during the side mission ‘SEARCHLIGHTS’.
  5. 5
    Use the SUPPORT CABLES from either side of the bridge and walk down slowly to reach the other side.
  6. 6
    Once across, jump onto the TENT and proceed to the very end.
  7. 7
    Drop down, and the SONAR will be on the right side of a table with a BLUE PHONE.
  8. 8
    Return to Tolga and Fatin with the SONAR.
Tips
  • If the GRAPPLING HOOK fails, climbing the bridge and using SUPPORT CABLES is a reliable alternative.
  • Be careful when descending the bridge using SUPPORT CABLES.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content