Skip to content
Re-entry Room Exit
Routine

Re-entry Room Exit

Follow this step-by-step guide to successfully exit the Re-entry Room in Routine, including printing your ID, obtaining the C.A.T. tool, and navigating the initial areas.

By ···10 min read·Multi-source verified
1 reading this guide  

Follow this step-by-step guide to successfully exit the Re-entry Room in Routine, including printing your ID, obtaining the C.A.T. tool, and navigating the initial areas.

Walkthrough
  1. 1
    Approach your helmet on the wall and press E/M1 to put it on.
  2. 2
    Interact with the computer screen to the right of where the helmet was.
  3. 3
    Click the FORM tab and complete the tutorial.
  4. 4
    Press the PRINT tab and select PRINT ID.
  5. 5
    Crouch (CTRL + Space) to pick up the ID that falls to the left of the computer.
  6. 6
    Go to the computer beside the door and press OPEN DOOR.
  7. 7
    Leave your room and walk left towards the panoramic screen.
  8. 8
    Go to the elevator door and note the computer.
  9. 9
    Enter the meeting room A01 to the right of the panoramic screen by pressing OPEN DOOR on its computer.
  10. 10
    Enter the second door on your right within the meeting room.
  11. 11
    Collect the C.A.T. tool from the second table on the left.
  12. 12
    Go to the right side of the meeting room and use the computer to open another door.
  13. 13
    Find batteries (blue-colored) inside the newly opened room.
  14. 14
    Return to the meeting room and approach the projection on the wall.
  15. 15
    Press R to view your tool, then press the Wireless Access Point button (triangles and lines symbol).
  16. 16
    Connect to the screen and go to the DATABASE page to find the elevator keycode (e.g., 4832 - this is random, check your own database).
  17. 17
    Leave the meeting room and go to the elevator door.
  18. 18
    Enter the keycode into the KEYPAD page and press OPEN DOOR.
  19. 19
    Inside the elevator, press GATEWAY on the computer to access the next area.
  20. 20
    Exit the elevator and walk left to the ASN terminal. Listen to the voice recording and view the screen (note: an access code is needed to shut it down, but this is not required for progression).
  21. 21
    Return to the elevator and look right at the Tram Station.
  22. 22
    Follow the cables from the gate to the box on the wall above the note.
  23. 23
    Aim your C.A.T. tool (M2) and fire a pulse (M1) at the box to open the gate.
  24. 24
    Walk through the opened gate to the Tram Station.
  25. 25
    Approach the Tram and the door will open.
  26. 26
    Get on the Tram and use the computer screen inside to select a location. Choose the Mall.
  27. 27
    Arrive at the Mall and go to the front desk. Press the IC assistance button.
  28. 28
    Follow the droid over the computer and log in using your ID number (found on the front of your suit, e.g., 9601 - this is random).
  29. 29
    Select either Business or Pleasure when asked your purpose.
  30. 30
    An error will pop up. Go back to the front desk and press the IC assistance button again.
  31. 31
    Follow the IC bot to a different entrance into the mall.
  32. 32
    Climb down the ladder.
  33. 33
    At the bottom, walk straight and to the right of the Wireless Access Point, find a hatch with cables on the wall at the far end.
  34. 34
    Follow the cables to an electrical box. Aim your C.A.T. tool (M2) and fire (M1) at the terminal to open the hatch.
  35. 35
    Press CTRL to climb through the hatch.
  36. 36
    Inside the room, a gate will close. Crouch and look under the Checkout desk to find a red button. Press it.
  37. 37
    Hide behind the desk as a bot breaks open the gate.
  38. 38
    When the gate is opened and the bot is out of the way, run left, then make a right toward Galaxy Video.
  39. 39
    Walk down the hall to the right of the Access Point (left side of Galaxy Video) to reach the security room. Read the note on the door indicating the meeting was moved to MEGAZONE.
  40. 40
    Go back to the plant area before the video store and through Union Plaza.
  41. 41
    Go straight forward toward the panel of screens, past the room where you entered via the hatch, and take a left.
  42. 42
    Go all the way down the hall and take a right into an area with purple lighting.
  43. 43
    Crouch (CTRL) to get under the shutters into MEGAZONE.
Tips
  • The C.A.T. tool requires batteries, which have three uses per battery. Check the charge by pressing R and looking at the meter.
  • Hostile bots roam certain areas and will attack on sight. You cannot fight them; avoid them by running (SHIFT) or hiding behind obstacles.
  • In MEGAZONE, find a powered-on arcade machine (back row with Gunshow image) and press E/M1 to interact with it. Press arrow prompts to play and earn an achievement.
  • Remember that keycodes and ID numbers are random for each player; always check your in-game database or suit for the correct information.
  • Chapter 01 Achievement: Reach Chapter 01

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content