Skip to content
[4-2-2-4] TCP/IP
Quake

[4-2-2-4] TCP/IP

Learn about Quake TCP/IP settings: Address, Port, and how to initiate a connection.

By ···10 min read·Multi-source verified
1 reading this guide  

Learn about Quake TCP/IP settings: Address, Port, and how to initiate a connection.

Address - This is your network address. Note that you cannot manually change this option; Quake sets it for you.

Port - The port at which your clients will connect to you. This is fine as it is, so just leave it as the default unless you know what you are doing.

OK - Waits for an incoming connection.

Tips
  • Leave the Port setting at its default unless you have specific networking knowledge.
  • The Address is automatically assigned by Quake.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content