Skip to content
[4-2-2-1] Modem
Quake Champions

[4-2-2-1] Modem

Configure your modem in Quake Champions: set COM port, baud rate (9600-57600), and dialing type. Learn about modem setup strings.

By ···10 min read·Multi-source verified
1 reading this guide  

Configure your modem in Quake Champions: set COM port, baud rate (9600-57600), and dialing type. Learn about modem setup strings.

Walkthrough
  1. 1
    Port: Select the COM (communication) port your modem is connected to.
  2. 2
    IRQ: This setting typically changes automatically when you adjust the 'Port' setting. Avoid manual changes unless you are certain of the implications.
  3. 3
    Baud: Set the baud rate for your COM port. Higher rates are not always superior. The minimum acceptable baud rate is 9600, and the maximum is 57600.
  4. 4
    Modem Setup...: Access this option to configure your modem's initialization (init) strings. Here, you can also choose between tone or pulse dialing. Tone dialing is the standard in most regions, including the UK and America.
  5. 5
    OK: This button initiates a wait for an incoming call.
Tips
  • Higher baud rates do not always guarantee better performance. Experiment within the 9600 to 57600 range.
  • Tone dialing is the globally recognized standard for most regions.
  • Only alter the IRQ setting if you have a deep understanding of its function.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content