Skip to content
[4-2-2-4] TCP/IP
Quake Champions

[4-2-2-4] TCP/IP

Learn about Quake Champions TCP/IP settings, including how your address is set and the default port.

By ···10 min read·Multi-source verified
1 reading this guide  

Learn about Quake Champions TCP/IP settings, including how your address is set and the default port.

Address - This is your unique identifier on the network. Quake Champions automatically assigns this for you; you cannot manually change it.

Port - This is the specific channel (or port) through which your clients will connect to you. The default setting is generally suitable, and you should only alter it if you have advanced knowledge of network configurations.

OK - Selecting this option will initiate the process of waiting for an incoming connection from other clients.

Tips
  • Leave the Port setting at its default unless you are certain about network configurations.
  • The Address is automatically managed by Quake Champions.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content