Assassin's Creed Valhalla: Repair Quartzite Ridge Anomaly

Q: How to repair the Animus Anomaly in assassins creed valhalla?

This Animus Anomaly mystery is located southeast of Manstone Rock in Sciropescire. You'll need to complete a hazardous parkour course, timing your jumps to avoid red blocks and manipulating light beams to stabilize structures.

Q: Where is the Quartzite Ridge Anomaly?

This Animus Anomaly mystery is located southeast of Manstone Rock in Sciropescire. You'll need to complete a hazardous parkour course, timing your jumps to avoid red blocks and manipulating light beams to stabilize structures.

Q: What are the hazards in the Animus Anomaly?

This Animus Anomaly mystery is located southeast of Manstone Rock in Sciropescire. You'll need to complete a hazardous parkour course, timing your jumps to avoid red blocks and manipulating light beams to stabilize structures.

Q: How to solve the light beam puzzle in assassins creed valhalla?

This Animus Anomaly mystery is located southeast of Manstone Rock in Sciropescire. You'll need to complete a hazardous parkour course, timing your jumps to avoid red blocks and manipulating light beams to stabilize structures.

AntMag.NET

Walkthrough

1
Interact with the anomaly southeast of Manstone Rock in Sciropescire.
2
Begin the parkour course, timing your jumps to avoid the moving red hazardous blocks. Touching them will cause desynchronization.
3
In the section with light beams and unstable structures, shine a light beam onto the reflector to the right.
4
Hop over to the reflector and shine it onto the splitter to stabilize the first set of unstable structures.
5
Continue along the path, watching out for hazards.
6
In the next area with many hazards, wait for them to pass behind you before jumping. Watch for side hazards as well.
7
Move the light beam projector so it shines on the reflector across the path.
8
Head back and follow the path to the reflector. Re-adjust it to shine on the unstable structure ahead.
9
Proceed to the next section with light beams and unstable structures.
10
Shine the first light beam at the unstable structure behind you.
11
Use the second light beam projector and shine it at the unstable structure between you and the reflector.
12
Cross over and re-adjust the reflector to shine on the middle unstable structure ahead.
13
Return to the first light beam projector and shine it onto the tall unstable block above the reflector.
14
Go back to the first light beam and shine it on the splitter in the middle to stabilize all structures ahead.
15
Perform a series of timed runs and jumps to avoid moving hazards. A good tactic is to wait until hazards are behind you before moving.
16
To climb the tall block surrounded by hazards: wait for a hazard to move down and start moving back up, follow it upwards for one jump, then quickly move around the wall to the left.
17
Head to the back wall and climb up that side, keeping an eye on the closely following hazard.

Tips

Hazardous blocks will cause desynchronization if touched.
Time your jumps carefully to avoid moving hazards. Waiting for them to pass behind you is often effective.
Pay attention to hazards coming from the sides as well as the front and back.
The light beam puzzles require careful aiming and adjustment of reflectors and splitters to stabilize structures.

100% Human-Written. AI Fact-Checked. Community Verified. Learn how AntMag verifies content